2

Installing the Switch

The ProCurve 2610 Switches come with an accessory kit that includes the brackets for mounting the switch in a standard 19-inch telco rack, in an equipment cabinet, or on a wall. The brackets are designed to allow mounting the switch in a variety of locations and orientations. Rubber feet are provided that can be attached so the switch can be securely located on a horizontal surface.

This chapter shows how to install the Switch 2610.

Included Parts

The 2610 Switches have the following components:

■HP ProCurve Switch Quick Setup Sheet

■Read Me First

■HP ProCurve Switches General Safety and Regulatory Information booklet

■2610 Switch Specific Safety and Regulatory Information sheet

■Console cable

■Customer Support/Warranty booklet

■Accessory kits:

2610 Non-PWR switches and the

2610-PWR switches, J9087A

J9086A 24/12-port partial PoEand J9089A
switch

 

Switch the Installing

Kit number 5069-6535

Contains:

•two mounting brackets

•eight 8-mm M4 screws to attach the mounting brackets to the switch

•four 5/8-inch number 12-24 screws to attach the switch to a rack

•four rubber feet

Kit number 5069-5705

Contains:

•two mounting brackets 1

•eight 8-mm M4 screws to attach the mounting brackets to the switch

•four 5/8-inch number 12-24 screws to attach the switch to a rack

•four rubber feet

1The mounting brackets in this kit are longer to support the increased depth of the 2610- PWR products.

2-1