Introducing the Switch

 

 

 

Front of the Switch

 

 

 

 

 

 

Switch LEDs

State

Meaning

 

 

 

 

 

 

Introducing

Test

Off

The normal operational state; the switch is not undergoing self test.

 

(green/

On

The switch self test and initialization are in progress after the switch has

 

 

orange)

 

 

 

 

been power cycled or reset. The switch is not operational until this LED

 

 

 

 

goes off. The Test LED also comes on briefly when you “hot swap” a mini-

 

the

 

 

GBIC into the switch; the mini-GBIC is tested when it is hot swapped.

 

 

Flashing

A component of the switch has failed its self test. The switch Fault LED,

 

Switch

 

orange2

Test LED, and the failed component LED will flash simultaneously.

 

 

1 The flashing behavior is an on/off cycle once every 0.8 seconds approximately, a fast flash.

 

 

2 The flashing behavior is an on/off cycle once every 1.6 seconds approximately, a slow flash.

 

 

3 ProCurve Switch 2610-PWR Series only.

 

 

See the ProCurve 600/610 External Power Supplies Installation and Getting

Started Guide for information on the LED behavior of the external power supplies.

1-7