HP ProCurve 2610 Back of the Switch, Console Port, Switch the Introducing, Figure 1-5.ProCurve Switch 2610-24/12PWR, Figure 1-3.ProCurve Switch 2610-24and 2610-48 non-PWR

Introducing the Switch

Back of the Switch

Console Port

This port is used to connect a console to a 2610 Switches by using the RJ-45 to DB9 cable, supplied with the switch. This connection is described under “8. (Optional) Connect a Console to the Switch” on page 26 in chapter 2, “Installing the Switch.” The console can be a PC or workstation running a VT-100 terminal emulator, or a VT-100 terminal.

Back of the Switch

Switch the Introducing

RPS Input AC power connector

Figure 1-3. ProCurve Switch 2610-24 and 2610-48 non-PWR

EPS Input		AC power connector
	RPS Input

Figure 1-4. ProCurve Switch 2610-24-PWR and 2610-48-PWR

		AC power
EPS Input
	RPS Input
		connector

Figure 1-5. ProCurve Switch 2610-24/12PWR

1-11