Introducing the Switch

Front of the Switch

 

 

Table 1-4.

Multiple-Display Port LEDs

Switch

 

 

 

 

 

 

All 2610 Switches

State

 

Meaning

 

 

Switch LEDs

 

the

 

 

 

 

 

 

Port LED View

Act

 

Indicates the Port LEDs are displaying network activity information.

Introducing

 

 

 

indicator LEDs

FDx

 

• if the Port LED is off, the port is operating at 10 Mbps.

 

 

 

Indicates the Port LEDs are lit for ports that are in full-duplex mode.

 

 

3 green LEDs)

Spd

 

Indicates the Port LEDs are displaying the connection speed at which each

 

 

 

 

 

port is operating:

 

 

 

 

 

• if the Port LED is flashing, the port is operating at 100 Mbps.

 

 

 

 

 

• if the Port LED is on continuously, the port is operating at 1000 Mbps.

 

 

 

 

 

 

 

 

 

 

 

 

Switch 2610-PWR Series

 

 

 

 

 

 

 

 

 

 

LED Mode

PoE

 

Indicates the Port LEDs are lit for ports that are providing PoE power to the

 

 

indicator LEDs

 

 

connected device.

 

 

(PoE is the

 

 

 

 

 

additional

 

 

 

 

 

LED, green)

 

 

 

 

 

 

 

 

 

Reset Button

This button is for:

■Resetting the switch - When the switch is powered on. This action clears any temporary error conditions that may have occurred and executes the switch self test.

■Restoring Factory Default Configuration - When pressed with the Clear button in a specific pattern, any configuration changes you may have made through the switch console, the web browser interface, and SNMP management are removed, and the factory default configuration is restored to the switch. For the specific method to restore the factory default configuration, see “Restoring the Factory Default Configuration” on page 12, “Troubleshooting” of this manual.

Clear Button

This button is used for:

■Deleting Passwords - When pressed by itself for at least one second, the button deletes any switch console access passwords that you may have configured. Use this feature if you have misplaced the password and need console access. This button is provided as a convenience, however if you are concerned with the security of the switch configuration and operation, you should make sure the switch is installed in a secure location. This button can be disabled by a CLI command.

■Restoring Factory Default Configuration - See Reset Button above.

1-10