HP ProCurve 2610 610 EPS LEDs, Installing the Switch, Figure 2-16.EPS status LEDs, Figure 2-15.Connecting a 600 RPS/EPS to a 2610 EPS

Installing the Switch

Installing the Switch

Installation Procedures

The following illustration demonstrates an example of connectivity between an RPS/EPS device and a Switch device as a PoE power supply.

Switch EPS output

EPS input port

Figure 2-15. Connecting a 600 RPS/EPS to a 2610 EPS

Power and

Fault LEDs

hp procurve

610eps

J8169A

Power

Internal Power Status

Fan/Temp

Fault	Fan/Temp Status flash =	too high
	Fan/Temp Status + Fault flash = Fan

610 EPS LEDs

610 EPS

Backup Power

EPS Port LEDs

Port LEDs

A (408 W total for PoE applications)

EPS Ports Pair

EPS Ports Pair B (408

total for PoE applications)

Device

Device

EPS A1

A1

Connected

EPS A2

A2

EPS B1

B1

Connected

EPS B2

B2

Power

Power

Backup Power Ports Status

Status

Status

EPS Ports: 50V 8.3A max each.

In ReadyOut Ready

	InternalPower		Device Connected
Fan/Temp		Power Status
Status LED	Status LED	LED	LED

Figure 2-16. EPS status LEDs

For a complete description of the LEDs see the documentation that came with the 610 EPS.

For redundant or additional PoE power, connect the 610 EPS to the switch using one of the four supplied EPS cables. EPS cables are 2.00 meters (6.56 feet) in length.

The following illustration demonstrates an example of connectivity between a 610 EPS device and two Switch devices as a PoE power supply.

2-24