Prepare the Slot For Use

To prepare a slot, you must first remove the metal slot cover. Then, if a plastic frl!er card is installed in the slot, remove it. (Retain slot covers and filler cards- they should be installed when slots are not in use.) If a slot divider is not installed, you must install one. Figure l-7 showsthe applicable hardware.

Removing Slot Covers

Using a Torx T-10 or 3/164nch flat-blade screwdriver, unscrewthe slot coverretaining screwsand remove the slot cover for the selectedslot.

Slot Divider

Filler Card

Figure 1-7. Slot Cover, Filler Card, and Slot Divider

t-14 Installing the Adapter