HP 300 Waiting for data For further print data, Out of fax paper, Redial pending, Try again later

Printing. . .	The printer has paused to wait
Waiting for data	for further print data.

Usually, no action is required.

However, if you are waiting

for the last page of your print job at the time you see this message, press Load/Eject to eject the last page.

Ready	Either there is no paper loaded in
Out of fax paper	the paper tray, or envelopes are
	loaded.

If you are printing envelopes and have the correct media size selected in your software, you may continue. If you want to print received faxes, make copies, or print reports from the menu, Load Letter-, A4-, or Legal-size paper into the paper tray, using the instructions in "Choosing Media" in chapter 4.

Redial pending	You tried to send a fax from the
Try again later	fax loading tray while a
	memory-stored fax was waiting
	to redial (sending to a group or
	sending a delayed fax).

Wait until the memory-stored fax has been sent before sending a fax from the fax loading tray.

Remove document	The HP OfficeJet was unable to	Remove the document from the
and reload	load the document you placed	fax loading tray, straighten the
	into the fax loading tray.	stack, and reload it.
Removing document	A document is being ejected	No action is required. If you
	from the fax loading tray after	don't want to wait while each
	you cancelled a fax or a copy, or	page is ejected, open the front
	after the power was lost during	panel and remove the document
	scanning.	yourself. Then close the front
		panel.
Report cancelled	You pressed the Stop button	No action is required.
	while a report was being printed.
Report in memory	The HP OfficeJet stored an	Press Start/Copy to begin
press START	automatic report in memory	printing the report.
	while the paper tray was empty.
Self test	Each time the power is turned on,	Wait for a few seconds for this
(Please wait)	the HP OfficeJet tests itself to	message to clear before using the
	make sure it's in good working	HP OfficeJet.
	order. If it finds a problem, an	If a "SYSTEM ERROR"
	error message will be displayed.
		message is displayed, advising
		you to call for service, please
		record the 3-digit error number
		before calling.

￿￿￿￿