Solution:
At this time, this issue is not scheduled to be fixed.
Issue (Internal):
There is no support for the direct USB port access with the ciof_open() function in the I/O filter kit.
Description:
For some products, the ciof_open() function in the I/O filter kit supported two handles for opening direct connections to the USB ports. The following two handles were supported:
●/dev/usb
●/dev/usb.4
In the
Solution:
At this time, this issue is not scheduled to be fixed.
Issue (Internal):
When a Letter and Envelope DL print job set for Tray 2 is overridden and instead Tray 1 is selected, a 49.205A ERROR displays on the control panel.
Description:
Even though Tray 1 is manually selected, srcDest continues to select Tray2, which does not support envelopes.
Solution:
At this time, this issue is not scheduled to be fixed.
Issue (Internal):
When OVERRIDE A4/LETTER equals YES, a letter print job sent to Tray 1 cannot be changed to A4 on the control panel.
Description:
The following steps were used to produce this issue:
1.Set Tray 1 for A4 Plain, but leave empty.
2.Send a letter, plain print job to Tray 1. The control panel displays a Load Tray1 Plain Letter message.
3.Load A4 paper into Tray 1.
4.When a size
5.Select the USE ANOTHER TRAY and USE TRAY 1 A4 PLAIN options. Tray1 A4 cannot be selected, and the control panel still displays a Load Tray1 Plain Letter message.
ENWW | General firmware [INTERNAL] 3 |
Known issues