HP 40G manual Save data, Delete data, Angle Setting

8.Display the computed

67statistics$76.

You can scroll down to the mean. The mean height is approximately 167.63cm.

9.2Setup.a histogram plot for the data.

>6+,)7@SETUP-PLOT

Enter set up information appropriate to your data.

10.Plot a histogram of the data.

>3/27@￿

Angle Setting	You can ignore the angle measurement mode unless your Fit
	definition (in Symbolic view) involves a trigonometric
	function. In this case, you should specify in the mode screen
	whether the trigonometric units are to be interpreted in
	degrees, radians, or grads.

Save data

The data that you enter is automatically saved. When you are finished entering data values, you can press a key for another Statistics view (like >6<0%@), or you can switch to another aplet or HOME.

Edit a data set In the Numeric view of the Statistics aplet, highlight the data (',7value to change. Type a new value and press >(17(5@, or press to copy the value to the edit line for modification. Press

>(17(5@ after modifying the value on the edit line.

Delete data

•To delete a single data item, highlight it and press >'(/@. The values below the deleted cell will scroll up one row.

•To delete a column of data, highlight an entry in that column and press >6+,)7@CLEAR. Select the column name.

•To delete all columns of data, press >6+,)7@CLEAR. Select

All columns.

8-10 Statistics aplet