HP 40G manual Aplet view configuration, Plot Setup Numeric Setup Symbolic, To change views

Displays pictures to supplement an aplet.

See “Notes and sketches” on page 14-1 for further information.

Aplet view configuration

You use the SETUP keys (>6+,)7@>3/27@,￿and >6+,)7@>180@) to configure the aplet. For example, press >6+,)7@SETUP-PLOT(>6+,)7@>3/27@)to display the input form for setting the aplet’s plot settings. Angle measure is controlled using the MODES view.

Plot Setup

Numeric Setup

Symbolic

Setup

Press>6+,)7@SETUP-PLOT. Sets parameters to plot a graph.

Press >6+,)7@SETUP-NUM. Sets parameters for building a table of numeric values.

This view is only available in the Statistics aplet in 2VAR mode, where it plays an important role in choosing data models. Press (>6+,)7@SETUP SYMB .

To change views	Each view is a separate environment. To change a view, select
	a different view by pressing >6<0%@, >180@, >3/27@ keys or
	select a view from the VIEWS menu. To change to HOME,
	press >+20(@. You do not explicitly close the current view,
	you just enter another one—like passing from one room into
	another in a house. Data that you enter is automatically saved
	as you enter it.
To save aplet	You can save an aplet configuration that you have used, and
configuration	transfer the aplet to other HP 39G/40G calculators. See
	“Sending and receiving aplets” on page 16-5.

Getting started 1-17