Delete all programs
Delete the contents of a program
You can delete all programs at once.
1.In the Program catalog, press >6+,)7@CLEAR.
2.Press <(6a.
You can clear the contents of a program without deleting the program name.
1.Press >6+,)7@PROGRM to open the Program catalog.
2.Highlight a program, then press (',7a.
3.Press >6+,)7@CLEAR, then press <(6a.
4.The contents of the program are deleted, but the program name remains.
You can configure an aplet and develop a set of programs to work with the aplet.
Use the SETVIEWS command to create a custom VIEWS menu which links specially written programs to the new aplet.
A useful method for customizing an aplet is illustrated below:
1.Decide on the aplet type that you want to use, for example the Function aplet or the Statistics aplet. The copied aplet inherits all the properties of the parent aplet. Save the standard aplet under a new name.
2.Configure the new aplet if you need to, for example by presetting axes or angle measures.
3.Develop the programs to work with your aplet. When you develop the aplet’s programs, use the standard aplet naming convention. This allows you to keep track of the programs in the Program catalog that belong to each aplet. See “Aplet naming convention” on page
4.Develop a program that uses the SETVIEWS command to modify the aplet’s VIEWS menu. The menu options
provide links to associated programs. You can specify any other programs that you want transferred with the aplet. See “SETVIEWS” on page
5.Ensure that the new aplet is selected, then run the menu configuration program to configure the aplet’s VIEWS menu.
6.Test the aplet and debug the associated programs.(Refer to “Debug a program” on page
Programming |