To draw a box

1.

In Sketch view, press '5$:_ and move the cursor to

 

 

where you want any corner of the box to be.

 

2.

Press %2;_. This turns on box-drawing.

 

3.

Move the cursor to mark the opposite corner for the box.

 

 

You can adjust the size of the box by moving the cursor.

 

4.

Press 2._ to finish the box.

To draw a circle 1. In Sketch view, press '5$:_ and move the cursor to where you want the center of the circle to be.

2.Press &,5&/_. This turns on circle drawing.

3.Move the cursor the distance of the radius.

4.Press 2._ to draw the circle.

DRAW keys

Key

Meaning

 

 

'27￿_

Dot on. Turns pixels on as the cursor

 

moves.

'27￿_

Dot off. Turns pixels off as the cursor

 

moves.

/,1(_

Draws a line from the cursor’s starting

 

position to the cursor’s current position.

 

Press 2._ when you have finished. You

 

can draw a line at any angle by moving the

 

cursor.

%2;_

Draws a box from the cursor’s starting

 

position to the point at which you press

 

2._.

&,5&/_

Draws a circle with the cursor’s starting

 

position as the center. The radius is the

 

distance between the cursor’s starting and

 

ending position. Press 2._ to draw the

 

circle.

 

 

14-4

Notes and sketches