HP 40G To import a graphics variable, To create a note, +,7@NOTEPAD, Name of the note is ‘MYNOTE’

To import a graphics variable

You can copy the contents of a graphics variable into the Sketch view of an aplet.

1.Open the Sketch view of the aplet (>6+,)7@SKETCH). The graphic will be copied here.

2.Press >9$56@, +20(_. Highlight Graphic, then press *A, and highlight the name of the variable (G1, etc.).

3.Press 9$/8(_2._to recall the contents of the graphics variable.

4.Move the box to where you would like to copy the graphic, then press 2._.

The notepad

Subject to available memory, you can store as many notes as you want in the Notepad (>6+,)7@NOTEPAD). These notes are independent of any aplet. The Notepad catalog lists the existing entries by name. It does not include notes that were created in aplets’ Note view s, but these can be imported. See “To import a note” on page 14-8 .

To create a note	1.	.Display the Notepad
in the Notepad		catalog.
		>6+,)7@NOTEPAD
	2.	1(:Create a new note.
	3.	Enter a name for your
		note$￿￿￿=.
		MYNOTE2.
		Note: In this example,
		the name of the note is ‘MYNOTE’.

14-6 Notes and sketches