HP 4500 N manual Output is curled or wrinkled

Output is curled or wrinkled

Cause	Solution
Media does not meet the specifications for this	Only use media that meets the media-use
printer.	specifications for this printer (see the
	supported media weights and sizes section in
	chapter 3).
Media is damaged or in poor condition.	Remove media from the input tray and load
	media that is in good condition.
Printer is operating in an excessively humid	Verify that the printing environment is within
environment.	humidity specifications.
You are printing large, solid-filled areas.	Large, solid-filled areas can cause excessive
	curl. Try using a different pattern.
Media used was not stored correctly and may	Remove media and replace it with media from
have absorbed moisture.	a fresh, unopened package.
Media has poorly cut edges.	Remove media, flex it, rotate it 180 degrees or
	turn it over, and then reload it into the input
	tray. If the problem persists, replace the media.

EN Chapter 9 149