HP 4500 N manual Loading Media into Tray, To load media into Tray

Loading Media into Tray 1

1

2

3

4

To load media into Tray 1

CAUTION

To avoid jams, never add or remove media from a tray during printing. To avoid damaging the printer, place labels and paper heavier than 105 g/m2 (28 lb) only in Tray 1.

1Pull up the tray extension.

2Slide the media-width guides all the way open.

3Load media into the tray with the side to be printed facing the printer. Slide the media in until it sits squarely in the bottom of the tray.

4Slide the media-width guides in until they hold the media firmly in place without bending it.

Note

For proper paper feeding, custom media must be at least 76 mm (3 in) wide and 127 mm (5 in) long.

Note

Load prepunched paper with the holes toward the side of the printer as illustrated. For two-sided printing, load media with the front side facing away from the printer.

60 Common Printing Tasks EN