HP 4500 N manual Configuring Trays 2 and 3 by Media Type, Tray Priority, To configure Trays 2 or

	Configuring Trays 2 and 3 by Media Type
	Trays 2 and 3 are cassette-style trays. You can select them by media
	size and type through your software application or the printer driver.
Note	Tray 2 has an internal media-size sensor and does not need to be
	configured on the printer control panel for media size. The media-size
	knob on the side of Tray 3 must be set to the correct media size.

To configure Trays 2 or 3

1Press MENU until PAPER HANDLING MENU displays.

2Press ITEM until TRAY 2 TYPE displays (or TRAY 3 TYPE when configuring Tray 3).

3Press VALUE until the proper media type displays.

4Press SELECT to save the setting.

5Press GO to return the printer to the READY state.

Tray Priority

When all trays have the same size and type media loaded, the printer pulls media from input trays in the following order:

When Tray 1 is configured as TRAY 1 MODE=FIRST

●Tray 1

●Tray 3 (if attached)

●Tray 2

When Tray 1 is configured as TRAY 1 MODE=CASSETTE

●Tray 3 (if attached)

●Tray 2

●Tray 1

58 Common Printing Tasks EN