HP 4500 N manual Setting the I/O Timeout, To set the I/O Timeout

	Setting the I/O Timeout
	I/O Timeout sets the number of seconds that the printer waits to
	receive additional data from the computer before switching I/O ports.
	The default setting for the printer is 15 seconds.
Note	Setting the I/O Timeout too high may cause a single I/O port to remain
	active and prohibit data from being received through other ports.
	Setting I/O Timeout too low may result in missing characters, out-of-
	order print jobs, or other print problems.

To set the I/O Timeout

1Press MENU until I/O MENU displays.

2Press ITEM until I/O TIMEOUT displays.

3Press VALUE to increase or decrease the I/O Timeout value. Holding the key down will change the value more quickly.

4Press SELECT to save the setting.

5Press GO to return the printer to the READY state.

EN Chapter 2 43