5Press ITEM until CFG ETALK=NO * displays.

6Press VALUE until CFG ETALK=YES displays.

7Press SELECT once. CFG ETALK=YES * displays.

8Press ITEM. PHASE=1 or PHASE=2 displays.

9Press ITEM to retain the value and continue, or press VALUE to change the phase parameter.

10Press SELECT to save the new value.

11If you are finished, press GO to return the printer to the READY

state.

– OR –

See the appropriate sections for other protocols that will be used.

Disabling Network Protocols (Optional)

By factory default, all supported network protocols are enabled. Disabling unused protocols has the following benefits:

decreases printer-generated network traffic

prevents unauthorized users from printing to the printer

provides only pertinent information on the configuration page

allows the printer control panel to display protocol-specific error and warning messages

To reach network protocols

1Press MENU until HP EIO 1 MENU displays.

2Press ITEM until CFG NETWORK=NO * displays.

3Press VALUE until CFG NETWORK=YES displays.

4Press SELECT once. CFG NETWORK=YES * displays.

5In the sections that follow, find the protocol that you want to disable.

108 Printer Interfaces

EN

Page 108
Image 108
HP 4500 N manual Disabling Network Protocols Optional, To reach network protocols