HP 4500 N manual Printer Control Panel Messages

Printer Control Panel Messages

	The following table lists the printer control panel messages for this
	printer. Printer messages with numeric prefixes are listed in numerical
	order. Printer messages without numeric prefixes are listed in
	alphabetical order.
Note	Except when the printer is initially turned on, messages are displayed
	in the display language selected in the printer control panel (such as
	English, French, or Spanish).

Printer Control Panel Messages

Message	Description	Recommended Action
ACCESS DENIED	Displayed for approximately	No action required.
MENUS LOCKED	5 seconds when a user attempts to
	modify a menu value while control
	panel locking is enabled.
BAD DUPLEXER	The duplex printing accessory is not	1. Check the duplex printing
CONNECTION	correctly installed.	accessory power cord.
		2. Turn the printer off and then
		back on.
		3. If the error continues, verify
		that the duplex printing
		accessory is correctly installed.
CALIBRATION	The printer is executing an internal	No action required.
EXECUTING	color calibration. This process
	should take approximately 90
	seconds.
CANCELING JOB	The printer is in the process of	No action required.
	canceling a print job. Incoming data
	for the current job will be discarded.
CANNOT DUPLEX	The printer cannot duplex because	Close the rear output bin. If the
CHECK REAR BIN	the rear output bin is open or the	bin is closed, verify that the
alternates with	media is not supported by the	media is supported by the
CANNOT DUPLEX	duplex printing accessory.	duplex printing accessory. See
CHECK PAPER		Supported Media Weights and
		Sizes section in Chapter 3.

EN Chapter 8 121