How To Use the Network Control Language (NCL) Commands To Manage a Router

Using TFTP To Transfer Operating Code, Configuration, and NCL Display

has parameters and thus includes a space, then enclose the command string in double quotes.

filename is the name of the configuration or operating code file on the remote host. On an HP Router CR, it can also be the name of the configuration file.

x.x.x.x is the IP address of the remote host.

Command

Function

fget X.X.X.X operator filename

Initiate a TFTP read request from a specific host or

 

router for the configuration or operating system.

 

Note: Fget does not use NCL-command.

fput X.X.X.X NCL-command filename

Initiate a TFTP write request to a specific host or to

 

an HP Router CR for the configuration or operating

 

system or display command output.

NCL Commands 7

7-31