How To Use Quick Configuration
Operating Notes
To Use Quick Configuration To Delete the
1.Move the cursor to any row occupied by one of these ports. The Help window will then display the messages indicated below:
Cursor positioned in any configured row for
which the interface module has been removed
Help message indicating port configurations for which there is no hardware present
Figure2.Press the [Ctrl] [D] key combination to delete the configuration for the nonexistent interface module. You will then be prompted with the message
Are you sure you want to delete the old configura- tions for this empty slot?
3.Type y and press [Return] to delete the configuration for the empty slot.
Notice that the highlighted port labels for the deleted ports will remain in the Quick Configuration screen until you save the new configuration and exit from the Quick Configuration utility (described in the following steps).