How To Use the Configuration Editor
How To Operate the Configuration Editor
The remaining items (including some that are not available on all models) provide tools for adjusting application or network management software modules to your requirements. Access only the items corresponding to the application or network management software modules you want to enable.
7.DoD Internet Router8.DECNET IV Routing Service9.SNMP Sessions10.Xerox Routing Service11.IPX Routing Service12.AppleTalk Router13.X.25 Network Service14.V.25 bis Network MappingMoving From One Screen to Another
At the bottom of the Configuration Menu screen (figure
Enter selection (0 for previous menu): _____
Whenever this prompt occurs, it is preceeded by a numbered list of items you can select. If you don’t want to access any of the listed items, just press [Enter] to return to the preceding screen or action item. But if you want to access one of the listed items, type the number for that item and press [Enter]. Then:
If the item you select contains no entries (indicated by ‘‘(0)’’ at the end of the item) such as:
DoD Internet Router (0)
you will be prompted by the message
Do you wish to add ...? Yes