How To Use the Configuration Editor

How To Operate the Configuration Editor

To exit from the Configuration Editor, return to the Configuration Menu screen (figure 4-3). At the Enter selection prompt, press

[Return]. At the option

Back To Menu ?

use the [>] or [<] key to select either Save and Exit ? (if you want to save any changes you have made) or Exit without Saving ? (if you don’t want to save any changes you have made) Pressing [Return] for either one then returns you to the Main menu.

To implement the changes you make in a Configuration Editor ses- sion, do the following:

a.Choose Save and Exit.

b.Boot the router (by using the NCL Boot command--refer to page 7-8).

To abandon the changes made in this Configuration Editor session and keep the previous configuration, choose

Exit without Saving

and press [Return].

4

Editor

Configuration

 

 

4-15