HP AdvanceStack Router 470 Configuration Menu, How To Exit From the, How To Exit From the Configuration Menu

N o t e

How To Use the Configuration Editor

How To Exit From the Configuration MenuHow To Exit From theConfiguration Menu

If you enter the Configuration Editor from the Main menu, do the following to exit:

1.Press [Return] as many times as you need to return to the Configuration menu (figure 4-2).

2.Press [Return] once again to display

Back to menu ?

3. Then do one of the following:

∙If you want to exit from the Configuration Editor without saving any changes you made, press [<] to display

Exit without saving ?

Then press [Return] again to exit from the Configuration Editor without saving any changes you made.

∙If you want to exit from the Configuration Editor and save any changes you made, press [>] twice to display

Save and exit ?

Then press [Return] again to exit and save any changes you made.

‘‘Saving’’ a new configuration retains it in memory, but does not delete the ‘‘old’’ configuration nor re-initialize the router with the new configu- ration. To re-initialize the router with a new configuration that you have just saved, reboot the router (or turn the power off, then on again). To reboot the router, use the boot command (page 7-8 in this manual; refer also to the description of the boot command in the Operator’s Reference’’.

4-6