How To Use Quick Configuration
How To Use the ‘‘Hotkeys’’
The Alphabetical Hotkeys
These keys vary, depending on which parameter in the Quick Configuration screen is currently selected. They either change the setting of the currently highlighted parameter or take you to the indicated screen in the Configuration Editor, where you can configure parameters that are not available in the basic Quick Configuration screen. In most cases (except for certain X.25 parameters on HP routers that have the X.25 service), you won’t need these keys unless you must access parameters that are not displayed in Quick Configuration.
For example, if you type / while the cursor is on the ‘‘System name’’ field in the Quick Configuration screen, you will see the following display.
‘‘E’’ option
Figure