How To Use Quick Remote

Operating Notes

For further information, refer to ‘‘The Numeric Hotkeys’’ on page 3-13.

SNMP Default Settings

If the minimal configuration a remote router receives from Quick Remote in a central router includes the DoD Internet Router (IP) service, then SNMP will be enabled in the remote router as follows:

Community Name: Public

Session Mode: Read (read-only access)

Session Type: Regular

Node Address: 0.0.0.0 (permits any network entity using Community Name to query the agent)

For more on SNMP parameters, refer to the Operator’s Reference.

Remote Quick 8

8-15