How To Use Quick Configuration

How To Create a Configuration

4.Press [Return] to return to the Main menu. (If a password has been pre- viously set, you will see the Copyright and Password screen--page 2- 3, with the password prompt. In this case, type the password and press [Return] again to return to the Main menu.)

How to exit from Quick Configuration without saving changes:

Use this procedure if you want to exit from Quick Configuration without saving any changes you have made during the current Quick Configuration session.

1.Press the [Ctrl] [C] key combination to exit from the Quick Configura- tion utility. You will then see the “save and exit” prompt (figure 3-6 on page 3-9).

2.Type n and then press [Return]. You will then see the ‘‘make changes’’ prompt:

The ‘‘make changes’’ prompt

Figure 3-8.The ‘‘Make Changes’’ Prompt

3.Type n again and press [Return]. The router exits from Quick Configura- tion and displays the Main menu (page 3-6).

3

Configuration

Quick

 

 

3-11