How To Use Quick Configuration

How To Create a Configuration

4.Type the system name and press [Return]. The new system name then appears in the ‘‘System name’’ field and the cursor moves to the next field.

If you don’t want to change the data in the selected field, just press [Return] to move to the next field.

If you want to skip over several fields, you can do so by using the cursor keys ([^], [v], [<], and [>]) or [Tab] to select the next field you want.

Also, pressing [<] when the cursor is in the first (‘‘Brg Enab’’) column ‘‘wraps’’ the cursor to the last (‘‘DECnet area.node’’) column in the preceeding row. Similarly, pressing [>] when the cursor is in the last (‘‘DECnet area.node’’) column ‘‘wraps’’ the cursor to the first (‘‘Brg Enab’’) column in the following row.

Figure 3-5. Use the [>] Key To Scroll the Display to Additional Parameters

5.Type the data for the next parameter, then press [Return] again. Repeat this step until you have entered data for all needed fields.

3-8