How To Use Quick Configuration

Operating Notes

If the Ethernet interface module is removed and Quick Configuration is subsequently restarted, the labels for the ports on the removed module will be highlighted to indicate that they are still configured in the router, even though they are no longer installed.

Highlighted port labels

indicate previously

configured ports on a interface module that has been removed from the router

Figure 3-22. Identifying Nonexistent Ports in the HP Router 650 Configuration

You can then do one of the following:

Delete the non-existent ports from the configuration. This is the recommended action if you will not be installing another interface module in the same slot as the module you just removed. (Refer to ‘‘To use Quick Configuration to delete the non-existent ports from the configuration’’ on the next page.)

Edit the configuration (including the parameters for the removed interface module), then reboot the router. You would do this if you wanted to install a new interface module in the slot from which have just removed the original interface module. To edit the configuration, refer to the earlier sections of this chapter.

3

Configuration

Quick

 

 

3-33