How To Use the Configuration Editor
How To Operate the Configuration Editor
Press [Return] to select the Yes option. The parameters you want to add will then appear. Follow the prompts to enter the values for the desired parameters.
For example, with the configuration menu displayed, if the DoD Internet Router (IP) Service was not configured and you wanted to access it, you would type 7 and press [Return] to display the following:
IP service (0 indicates ‘‘not configured’’)
Prompt to access IP configuration
Figure
Continuing from page
Circuits (2)
the entries will appear as a numbered list and you will be prompted with
Action
For example, with the configuration menu displayed, if one Ethernet port and one WAN port were configured and you wanted to add another port configuration, you would type 4 and press [Return] to see a screen similar to the following:
| 4 | |
| Editor | Configuration |
|
|
|
|
|
|