How To Use Quick Remote

How To Create and Save a Quick Remote Configuration

How To Create and Save a QuickRemote Configuration

The main steps to creating and storing a configuration in Quick Remote for use by an remote router are:

1.Start Quick Remote on the central router.

2.Select the WAN port through which you want to make the configuration available to a remote HP router.

3.Enable or disable bridging and enter a minimal set of IP and/or IPX configuration values.

4.Save the new configuration and exit from Quick Remote.

To start Quick Remote and enter a minimal configuration:

1.Plan the Quick Remote parameters for the remote router(s).

2.Display the Main menu on the central router.

3.Start a Quick Remote session. (Press [7].) When the ‘‘Welcome’’ screen appears, press [Return]. The console then displays the Quick Remote screen.

Remote Quick 8

8-9