Using HP 3D DriveGuard software

The HP 3D DriveGuard software enables you to perform the following tasks:

Enable and disable HP 3D DriveGuard.

NOTE: Permission to enable or disable HP 3D DriveGuard is dependent on certain user privileges. Members of an Administrator group can change privileges for non-Administrator users.

Determine whether a drive in the system is supported. To open the software and change settings, follow these steps:

1.In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window.

– or –

Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard.

NOTE: If prompted by User Account Control, click Yes.

2.Click the appropriate button to change settings.

3.Click OK.

Using HP 3D DriveGuard 79

Page 91
Image 91
HP 8440P manual Using HP 3D DriveGuard software