Connecting to a local area network (LAN)

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.

To connect the network cable:

1.Plug the network cable into the network jack (1) on the computer.

2.Plug the other end of the cable into a network wall jack (2).

WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem or telephone cable into the RJ-45 (network) jack.

32 Chapter 2 Wireless, modem, and local area network

Page 44
Image 44
HP 8440P manual Connecting to a local area network LAN