1 The basics

21

1Open Tray 1.

2Load A4- or Letter-size paper with the long edge leading into the product. See “Paper specifications” on page 83 for more information on loading custom sizes.

CAUTION

To avoid jams, print sheets of labels one at a time.

3Adjust the paper guides so they lightly touch the paper stack, but do not bend the paper.

4Make sure the paper fits under the tabs on the guides and not above the load level indicators.

Note

If printing on A3- or Ledger-size paper, also pull out the tray extension until it stops.

Note

By default, Tray 1 Size is set to Any. If you do not specify a size, any job sent to the product prints from Tray 1, if print media is loaded in the tray.

1

2

3

Loading input trays

ENWW