6 Output devices

66

Multifunction finisher

Paper handling features

lstacks up to 1000 sheets of A4- and Letter-size paper or up to 500 sheets of A3- and Ledger-size paper

lstacks up to 50 booklets of 5 sheets of A3- and Ledger-size paper

loffsets jobs

lstaples up to 50 sheets of paper per document of A4- and Letter-size paper

lstaples up to 25 sheets of paper per document A3- and Ledger-size paper

lfolds single pages

lsaddle-stitches and folds booklets up to 10 sheets of paper (40 pages).

Using the stapler

The finisher can staple documents consisting of a minimum of two pages, and a maximum of 50 pages of 75 g/m2 (20 lb) paper or equivalent 5.5 mm (.22 inches). The pages must be 64 to 199 g/m2 (17 to 53 lb) of all sizes supported by the product.

Consider these additional points:

lBin 2 can hold up to 1000 sheets stacked (not stapled).

lHeavier media may have a stapling limit of fewer than 50 pages.

If the job you want stapled consists of only one sheet, or if it consists of more than 50 sheets, the finisher delivers the job to the bin without staples.

Selecting the stapler

You can usually select the stapler through your program or driver, although some options might be available only through the driver. See “STAPLING DOCUMENTS” on page 51 or “SADDLE STITCHING” on page 50. Where and how you make selections depends on your program or driver.

If you cannot select the stapler from the program or driver, select the stapler from the product control panel.

Multifunction finisher

ENWW