1 The basics | 28 |
To set a custom size for Trays 2, 3, and 4
1Make sure the switch inside the tray you want to configure is in the Custom position.
2A message on the control panel prompts you to enter the paper size.
3Touch unit of measure (Millimeters or Inches). (The default is Millimeters because the marks on the tray guides are in millimeters.)
4Use the numeric keypad to select the X (front to back) dimension.
5Touch OK.
6Use the numeric keypad to select the Y (left to right) dimension.
7Touch OK to exit the menus.
Loading input trays | ENWW |