HP 9000MFC manual Modifying copy settings for the current job, Adjusting the copy contrast

4 Walk-up copying 45

Modifying copy settings for the current job

You can modify your copies by adjusting the contrast, reducing or enlarging, or enhancing.

Adjusting the copy contrast

You can adjust the contrast by touching the arrows on the Contrast Control bar. The slider moves to the lighter or darker area of the Contrast Control bar.

Reducing or enlarging copies

The product has an autoscaling feature. If there is a difference between original paper size and copy paper size, the product can autodetect a size mismatch between the original page size and the copy page size. The original image is reduced or enlarged automatically to match the copy paper size. You can override autoscaling using the reduce and enlarge feature.

The product can reduce copies to as little as 25 percent of the original size and enlarge copies to as much as 400 percent of the original (200 percent using the ADF).

To reduce or enlarge your copies, touch the arrows on the Reduce/Enlarge button until you obtain the desired reduction or enlargement. The scale percentage box in the center of the Reduce/Enlarge button indicates the percentage of reduction or enlargement.

Enhancing copies

You can enhance the quality of your document by touching Enhance to gain access to the enhancement screen.

Background Removal

If you copy a document that is printed on colored paper, or if you use two-sided copying, you can enhance your copy quality by removing the background that might cause your copy to streak or blur. Touch the Enhance button to gain access to the embedded Background Removal screen. Adjust the amount of background removal by touching the arrows on the Background Removal Control. The slider moves to the lighter or darker area of the Background Removal Control bar.

Modifying copy settings for the current job ENWW