International, Address, Options, Safety | HP 900 guide

Specifications and Regulatory Information

Regulatory Information

	International
	Products sold internationally by Hewlett-Packard and its authorized dealers meet the
	specifications listed below.
	Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014)
Address:	Hewlett-Packard Company
	Mobile Computing Division
	19310 Pruneridge Ave.
	Cupertino, CA 95014
	declares that the following product
Product name:	HP OmniBook 900
Options:	All
	conforms to the following product specifications
Safety:	IEC 950:1991+A1,A2,A3,A4 / EN 60950 (1992)+A1,A2,A3,A4,A11
	GB4943-1995
	IEC 825-1:1993 / EN 60825-1:1994, Class 1

EMC:

Supplementary Information:

CISPR 22:1993+A1,A2 / EN 55022 (1994)+A1,A2: Class B [1 ] GB9254-1988

EN 50082-1:1992

IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD

IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m

IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines FCC Title 47 CFR, Part 15 Class B

Ansi C63.4:1992

AS/NZS 3548:1995 Rules and Regulations of Class B

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and EMC Directive 89/336/EEC and carries the CE mark accordingly.

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The ac adapter shipped with this product is designed to operate on all power systems, other than IT power systems.

[1] The product was tested in a typical configuration with Hewlett-Packard personal computer peripherals.

Quality Department,

Hewlett-Packard Company

Mobile Computing Division

Reference Guide 139

Image 139

HP 900 manual International, Address, Options, Safety, Supplementary Information

Contents

HP OmniBook Reference Guide Reference Guide HP Software Product License Agreement Edition History Contents Expanding the OmniBook Managing Battery Power Troubleshooting Configuring the OmniBookSupport and Service Index Specifications and Regulatory Information 127 Introducing the OmniBook Source Getting More InformationDescription and Location Included in the OmniBook box Taking Inventory To buy OmniBook accessories OmniBook-Front View OmniBook Features OmniBook-Side View OmniBook-External Module Bay OmniBook-Back View To set up the OmniBook and Windows Setting Up for the First TimeWarranty. Refer to the warranty statement for your product Windows NT Year To connect the floppy disk drive Operating the OmniBook To start and stop the OmniBook Starting and Stopping the OmniBook Hint To reset the OmniBook Checking the Status of the OmniBook To check power status and drive activity To check the keyboard status Using the OmniBook Pointing Devices Windows To use the built-in pointing devices Install touch pad support Disable the pointing stickTo activate full touch pad capabilities To activate full pointing stick capabilities To configure pointing devicesEnable the pointing stick Install pointing stick support To disable the touch pad or pointing stick To adjust the display brightness Using the OmniBook DisplayTo extend the life of the display To suspend the OmniBook when closing the display Windows Adjusting the Audio SystemTo adjust the volume On the Keyboard These keys Do this Using the OmniBook KeyboardTo use the Fn hot keys OmniBook Library To use the embedded keypad To use the Windows keys To use the ALT GR key Working in Comfort What is RSI?About Repetitive Strain Injury What can I do to avoid RSI? What causes RSI?What if I experience discomfort? Your Chair Preparing Your Work Environment Your Work Posture Your Work Surface Your HP Monitor Setting Up Your HP Computing Equipment Working in Comfort Document Holders Monitor Use SpecificationsYour HP Keyboard Mice and Other Input Devices Working in Comfort Headphones and Speakers Comfort and Safety ChecklistGeneral Overall Your HP OmniBook Computer Using Your Mobile ComputerPreparing Your Mobile Work Environment Working in Comfort Protect your work Taking Care of Your OmniBookProtect your OmniBook from damage Protect your hard disk drive from damage Managing Battery Power How Power is Managed To install APM for Windows NT Monitoring Battery Power From Windows Control Panel To check the battery statusOn the Battery From the Windows Taskbar To recharge a battery To respond to a low-battery warning Charging time Battery lifeOptimum Charging Adapter To replace the battery Safety on To save battery power Conserving Battery Power Windows 95, 98, or NT To set power time-outs To get the most from your battery Page Expanding the OmniBook To install hot-swap support Using the External Module BayAction, you could lose data Otherwise, you could lose data To remove or install the bay or module Installing To connect the floppy disk drive to the parallel port To identify connectors for external devices Connecting External Devices To change display settings in the Bios Setup utility To enable the built-in and external displaysTo connect an external monitor To use an external monitor To connect a printer To connect an external keyboard or PS/2 mouse For Windows 95, 98, or NT To connect a serial deviceTo connect a serial mouse To connect USB devices To connect audio devices Windows NT 4.0 does not support infrared communication To make an infrared connectionPrinting to an Infrared Printer Transferring Files with an Infrared Connection To insert and remove a PC Card Using PC Cards Using PC Cards To install a docking tray Using Docking Products To dock the OmniBook To undock the OmniBook To replace the hard disk drive Installing a Hard Disk Drive To replace the hard disk drive holder Installing a RAM Expansion Module Steps Forward onto the front of the case To remove a RAM expansion module Page Configuring the OmniBook To run the Bios Setup utility Using Bios Setup Description SettingDefault Main Menu System Devices Menu Security Menu Power Menu Exit Menu Boot Menu To get more information about TopTools Using TopToolsTo install TopTools To run TopTools To set or change an OmniBook password Configuring Security Options To install the VirusScan utility To delete an OmniBook password To set PC identification To attach a security cable Disk drive To enable hard disk drive lock Troubleshooting If a port on a dock isn’t working Solving ProblemsAccessory Problems If you can’t boot from a CD in a CD-ROM drive If a DVD drive locks up the computer in Windows If the OmniBook redocks after undocking If sound is not audible Audio ProblemsIf sound doesn’t record If an external monitor doesn’t work Display ProblemsIf the OmniBook is on, but the screen is blank If the screen is difficult to read If DVD images don’t play smoothly Hard Disk Drive ProblemsIf multiple display support doesn’t work in Windows If a DVD image doesn’t appear on an external monitor If the hard disk makes buzzing or whining noise If you have problems with infrared communicationsIf files are corrupted If the pointer is difficult to control Keyboard and Pointing Device ProblemsIf the touch pad or pointing stick doesn’t work If an external mouse doesn’t work If a special feature on the PS/2 mouse doesn’t workIf you can’t type the euro symbol If the embedded numeric keypad doesn’t work Special pointing stick features stop working after docking Memory ProblemsIf a message says you are out of memory If memory doesn’t increase after adding RAM PC Card Pcmcia ProblemsIf the OmniBook doesn’t recognize a PC Card If the OmniBook pauses or runs sluggishly Performance ProblemsIf an I/O card stops communicating properly If the OmniBook gets hot If the OmniBook keeps beeping Power and Battery ProblemsIf the OmniBook shuts down slowly If the OmniBook turns off immediately after it turns on If the OmniBook stops responding If the battery doesn’t chargeIf the OmniBook doesn’t suspend as expected If an infrared printer doesn’t print Printing ProblemsIf the OmniBook doesn’t automatically hibernate as expected If a serial or parallel printer doesn’t print If the serial or parallel port is not working Serial, Parallel, and USB ProblemsIf the left edge of printed output is missing If the serial mouse doesn’t work If the USB port is not working Startup ProblemsIf the OmniBook doesn’t boot from battery power If a serial modem doesn’t work properly If the OmniBook doesn’t boot from the floppy disk drive To run the diagnostic test Testing the Operation Space To create a diagnostic floppy disk Recovering Software To recover the factory installation of Windows To create a Support Utility Disk To replace a damaged Recovery CD To update the OmniBook BiosExcept for the PC Identification and Password Support and Service Provider Type Type of Assistance Electronic Support ServicesGetting HP OmniBook Assistance Support Assistance Customer Support Centers Repair AssistanceHP will not be able to help with questions about Africa/Middle East North AmericaCentral/South America Europe Hewlett-Packard Limited Warranty Statement Hewlett-Packard Limited Warranty Statement Specifications and Regulatory Information Models with 900 B after serial number Hardware SpecificationsModels with 13-inch display Models without 900 after serial number RAM Security Features Environmental Limits Major ICs System Interrupts Software System Resources System Input/Output Addresses 100-3FF System Memory DMA Channels Rated Voltage and Current Safety InformationPower Cords Country Ergonomics Battery Safety LED Safety Connections to Peripheral Devices Regulatory Information Japan CanadaDeclaration of Conformity Options SafetyInternational AddressPage APM Index Reference Guide Reference Guide Tattooing, 95 temperature limits Reference Guide