HP 900 Using Docking Products, To install a docking tray

Expanding the OmniBook

Using Docking Products

Using Docking Products

A docking product provides external connections for the OmniBook that you can leave in place whenever you remove the OmniBook from your desk. Instead of disconnecting and reconnecting peripheral devices, simply undock and dock the OmniBook.

For more information about using docking products, see the User’s Guide that shipped with your dock.

To install a docking tray

Your dock requires a tray that accommodates your specific OmniBook model. Install this tray prior to connecting the OmniBook to the dock.

1.Select the tray labeled for the OmniBook 900. If you do not have a tray for the OmniBook 900, call the number listed in “Support Assistance” on page 122 to order one.

2.Slide the rear of the tray into the dock as shown on the dock label.

3.Push down firmly on both sides of the tray until it snaps into place.

To remove a tray from the dock, pull the latch (at the center front of the dock) towards you until the tray pops free.

76 Reference Guide