HP 900 manual To use the built-in pointing devices, Windows

Operating the OmniBook

Using the OmniBook Pointing Devices

To use the built-in pointing devices

	1. Place your hands in the typing position.
	2. Pointing stick. With your index finger, press the pointing stick in the direction you
	want the pointer to move. Pressing away from you moves the pointer up the screen;
	pressing toward you moves the pointer down the screen.
	Touch pad. Move a thumb or finger across the touch pad in the direction you want
	the pointer to move.
	3. Use the left and right click buttons, which function like the left and right buttons on a
	mouse, to make your selection.
	∙ To open an application, move the pointer over the icon, then press the left button
	twice rapidly.
	∙ To make menu selections, move the pointer to the item and press the left button
	once.
	∙ To open the shortcut menu for an item, move the pointer over the item and click
	the right button.
	∙ To drag an item, move the pointer over the item. Press and hold the left button
	while you move the pointer to the new location. Release the button.
	The default pointing device driver (PS/2 TrackPoint) supports the enhanced features of
	the pointing stick and basic features the touch pad.
	You can customize the OmniBook to support enhanced touch pad features (see the next
	topic). If you do this, keep in mind that you are selecting enhanced features for the touch
	pad only. You cannot activate enhanced features for both simultaneously.
Windows 2000	Under Windows 2000, enhanced features for the pointing stick and touch pad are not
	available at this time. Check the Customer Care website
	(http://www.hp.com/cposupport/eschome.html) for PS/2 TrackPoint and touch pad
	device drivers for Windows 2000. The default pointing device driver is the standard
	PS/2 Compatible Mouse driver.

Reference Guide 25