Operating the OmniBook
Using the OmniBook Display
Using the OmniBook Display
| To adjust the display brightness |
| The OmniBook uses special key combinations, called hot keys, to control brightness. |
| ∙ Press Fn+F1 to decrease the brightness. |
| ∙ Press Fn+F2 to increase the brightness. |
|
|
Hint | To maximize your battery operating time, set the brightness to the lowest comfortable |
| setting, so that the internal light uses less power. |
|
|
To extend the life of the display
Observe the following guidelines to maximize the life of the backlight in the OmniBook display.
∙ Set the brightness to the lowest comfortable setting (Fn+F1). If you are using an external keyboard, Fn = left CTRL + left ALT.
∙ When working at your desk, connect an external monitor and turn off the internal display (Fn+F5).
∙ Avoid using a screen saver or other software that prevents the OmniBook from changing to Suspend or Standby mode after a
∙ Do not disable Suspend or Standby
∙ If you are using ac power and have no external monitor attached, change to suspend or standby when the OmniBook is not in use.
Reference Guide | 29 |