HP 900 To enable hard disk drive lock

Configuring the OmniBook

Configuring Security Options

4. Type your administrator password, then press ENTER.

5. Click Settings and Actions.

6. In the “Tattooing String” box, type the unique set of characters which will identify your PC. You can type up to 80 characters including spaces and special characters. Do not press ENTER when typing. The string wraps automatically.

	To enable hard disk drive lock
	Hard disk drive lock helps you keep your information secure. Hard disk drive lock does
	not protect a second hard disk drive installed in the module bay.
CAUTION	When you enable hard disk drive lock, the current user password (or
	administrator password if that is the only password set) is encoded on the hard
	disk drive.

If you move the hard disk drive to another OmniBook, you can’t access the drive until you set the user (or administrator) password to match the drive’s password. After you match the drive’s password, you can change the OmniBook (and drive) password.

If you forget the password, your data cannot be recovered by you or by Hewlett- Packard.

1.From the Start menu, shut down, then restart the OmniBook.

2.When you see the HP logo, press F2 to enter the BIOS Setup utility.

3.From the Security menu, enable Password Required To Boot.

4.From the Security menu, enable Hard Disk Drive Lock.

5.Press F10 to save and exit the BIOS Setup utility.

96 Reference Guide