HP 900 Setting Up for the First Time, To set up the OmniBook and Windows

Introducing the OmniBook

Setting Up for the First Time

When you set up the OmniBook for the first time, you’ll need to install and charge the battery, connect the ac adapter, turn on the OmniBook, and go through the Windows setup program.

To set up the OmniBook and Windows

CAUTION	Use only the HP adapter shipped with the OmniBook (or other approved adapter).
	Using any other ac adapter could damage the OmniBook and may void your
	warranty. Refer to the warranty statement for your product.
	1.	Install the OmniBook battery (see the Quick Start sheet or “To replace the battery” on
	1.
		page 55).
	2.	Plug in the ac adapter.
	3.	Connect the ac adapter to the OmniBook’s right side, as shown. The OmniBook
		battery starts charging.

Let the battery charge a full 24 hours to completely charge the internal clock battery.

Otherwise, the OmniBook may not keep the correct date and time.

16 Reference Guide