HP A7340-96002 manual Assembling the Outer Rails HP Rack

Figure 7. Assembling the Outer Rails (HP Rack)

–For a Compaq/Rittal rack, install one #10-32 x 5/8 Phillips pan-headscrew in the upper hole location of the right rail. Then, install one #10-32 x 5/8 Phillips pan-head screw in the lower location of the left rail.

6.Assemble the two inner rails (one on each side) to the switch using (6) #8-32 x 5/16 Phillips pan-head screws, and #8 flat washer as shown in Figure 8.

Figure 8. Assembling the Inner Rails

10 Quick Start Guide