1.Verify that the RSHD service (on a UNIX machine) or the FTP service (on a Windows machine) is running on the host workstation.
2.Login to the switch as the admin user.
3.At the command line enter the following command:
configUpload "hostIPaddr", "user", "path_filename","password"
where hostIPaddr is the IP address of the host computer, user is the User ID used to log into this computer, path_filename is the path location and filename of the configuration file, and password is the password for the user ID specified. If only configUpload is entered the system prompts you for each parameter.
Example:
switch:admin> configupload
Server Name or IP Address [host]: 123.45.678.901
User Name [user]: kelev
File Name [config.txt]: switch1
Protocol (RSHD or FTP) [rshd]: ftp Password:
upload complete
Restoring the System Configuration Settings
To restore the system configuration settings from a backup:
1.Verify that the RSHD service or the FTP service is running on the host workstation (Windows or UNIX).
2.Login to the switch as the admin user.
3.Shut down the switch by entering the following command: switchDisable
4.At the command line enter the following command:
configDownload "hostIPaddr", "user", "path_filename","password"
where hostIPaddr is the IP address of the host computer containing the configuration file, user is the User ID used to log into this computer, path_filename is the path location and filename of the
Setup | 23 |
