HP book XE2 manual Removing the CPU and Motherboard

Using the Phillips screwdriver, remove the three screws (two long screws on top and one short screw on the front left).

Technology Code (DD):

Using a Phillips screwdriver, remove the four screws (two long screws on top, one short screw on the top right, and one short screw on the front left).

∙Tilt the front of the LED PCA up to detach the two connectors on the bottom.

∙Lift the PCA out.

Heatsink

LED PCA

CPU module Modem PCA

Floppy disk drive

CD-ROM drive

Motherboard

Bottom case

Figure 2-11. Removing the CPU and Motherboard

Note: Omnibook XE2-DB shown. Some details differ from Omnibook XE2-DD.

8.Remove the modem PCA (on the right):

∙Using the Phillips screwdriver, remove the two screws.

2-18 Removal and Replacement HP OmniBook XE2