HP book XE2 manual Releasing the RAM Module Latches Reassembly Notes

3.Release the two latches at the sides of the RAM module by pushing them gently outward, away from the sides of the module. The free edge of the module pops up.

4.Pull the module out of the connector. Handle it only by the edges.

Figure 2-3. Releasing the RAM Module Latches

Reassembly Notes

∙Insert the RAM board into the connector at about a 30° angle until it is fully inserted. Then press down at both sides until both latches snap closed.

HP OmniBook XE2 Removal and Replacement 2-5