Selecting the input signal

You can connect two computers to this monitor using the video input 1 (HD15) and video input 2 (BNC) connectors. To switch between the two computers, use the INPUT switch.

Move the INPUT switch.

The currently selected connector (“INPUT 1” : HD15 or

“INPUT 2” : BNC) appears on the screen for a few seconds.

INPUT 1 2

Note

If no signal is input to the selected connector, NO INPUT SIGNAL appears on the screen. After a few seconds, the monitor enters the power saving mode. If this happens, switch to the other connector.

Automatically sizing and centering the picture (AUTO)

You can easily adjust the picture to fill the screen by pressing the ASC (auto sizing and centering) button.

Press the ASC button.

The picture automatically fills the screen.

ASC

Notes

•This function is intended for use with a computer running Windows or similar graphic user interface software that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges (such as an MS- DOS prompt).

•The picture will fill the screen to the edges only if the aspect ratio of the picture is 16:10 and the signal is listed on the preset mode timing table in Appendix. Pictures with an aspect ratio other than 16:10 are displayed at their actual resolution and do not fill the screen to the edges.

•The displayed image moves for a few seconds while this function is performed. This is not a malfunction.

GB

9