Resetting the adjustments
This monitor has the following three reset methods. Use the RESET button to reset the adjustments.
RESET
xResetting a single adjustment item
Use the joystick to select the adjustment item you want to reset, and press the RESET button.
xResetting all of the adjustment data for the current input signal
Press the RESET button when no menu is displayed on the screen. Note that the following items are not reset by this method:
•
•adjustment mode in the COLOR menu (EASY, EXPERT, sRGB) (page 12)
•
•control lock (page 15)
xResetting all of the adjustment data for all input signals
Press and hold the RESET button for more than 2 seconds.
Note
The RESET button does not function when 
(CONTROL LOCK) is set to ON.
Technical Features
Preset and user modes
When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the monitor’s memory to provide a high quality picture at the center of the screen. (See Appendix for a list of the factory preset modes.) For input signals that do not match one of the factory preset modes, the digital Multiscan technology of this monitor ensures that a clear picture appears on the screen for any timing in the monitor’s frequency range (horizontal: 30 – 121 kHz, vertical: 48 – 160 Hz). If the picture is adjusted, the adjustment data is stored as a user mode and automatically recalled whenever the same input signal is received.
Note for Windows users
For Windows users, check your graphic board manual or the utility program which comes with your graphic board and select the highest available refresh rate to maximize monitor performance.
Power saving function
This monitor meets the
Power mode | Power | ! (power) |
| consumption* | indicator |
|
|
|
normal | ≤ 160 W | green |
operation |
|
|
|
|
|
1 standby | ≤ 15 W | green and orange |
|
| alternate |
|
|
|
2 suspend | ≤ 15 W | green and orange |
(sleep)** |
| alternate |
|
|
|
3 active off*** | ≤ 1 W | orange |
(deep sleep)** |
|
|
|
|
|
power off | 0 W | off |
|
|
|
*Figures reflect power consumption when no USB compatible peripherals are connected to the monitor.
**“Sleep” and “deep sleep” are power saving modes defined by the Environmental Protection Agency.
***When your computer enters power saving mode, the input signal is cut and NO INPUT SIGNAL appears on the screen before the monitor enters active off mode. After a few seconds, the monitor enters power saving mode.
16
