Remote control questions

Symptom

Remedy

 

 

 

 

The remote control does not work.

Check the following, and try the proposed solution:

 

 

￿ Make sure that the batteries are inserted with the polarity properly

 

 

aligned.

 

 

￿ Make sure the remote control batteries are fresh. If they are worn out,

 

 

replace them with new batteries.

 

 

￿ Make sure the remote control is within correct operating range.

 

 

￿ Make sure the remote sensor window on the front of the TV is not

 

 

under too much light, direct sunlight, or strong artificial light.

 

 

￿ Make sure there are no obstacles between the remote control and the

 

 

sensor window on the front of the TV.

 

 

￿ Make sure the remote control is pointed at the TV and is not farther

 

 

than 16.4 feet (5 meters) away.

 

 

 

 

I cannot add a channel to the Fav

To add a channel to the Fav button favorites list, the channel must be in

 

button favorite channel list.

the channel list. The Setup Wizard, or the Auto Scan option on the OSD

 

 

Channel menu, creates the channel list when it searches for channels.

 

 

Run the Setup Wizard or the Auto Scan; see “Starting the Setup

 

 

Wizard” on page 80 or “Searching for channels” on page 72.

 

 

 

Troubleshooting

The remote control does not control

control.

￿ Try all listed codes for the equipment brands you are trying to set up,

 

other home entertainment equipment.

or try programming the remote control by using the auto setup mode;

 

 

see “Programming the Remote Control for a Home Entertainment

 

 

Device” on page 50.

 

 

￿ Make sure the equipment can be operated with an infrared remote

 

 

 

 

The remote control does not blink the

Replace the batteries in the remote control.

 

selected indicator button (TV, CBL,

 

 

DVD, AVR, AUX) when I push a

 

 

button.

 

 

 

 

 

Troubleshooting 119